Blomberg DND 1976 X, DND 1972 XD Water dispenser, Filling in the water tank of water dispenser

Models: DND 1976 X DND 1976 DND 1972 ED DND 1972 XD

1 162
Download 162 pages 36.8 Kb
Page 19
Image 19

Water dispenser

(OPTIONAL)

Water dispenser is a very useful feature to obtain chilled water without opening the door of your fridge. Since you do not have to open the door of your fridge frequently, you also save on electricitiy.

Using the water dispenser Push in the lever of the water dispenser with your glass. By releasing the lever, you cut off the dispensing.

When operating the water dispenser, maximum flow is achieved by fully depressing the lever. Please note, how much water flows from the dispenser depends on how far you depress the lever. As the level of water in your cup / glass rises, gently reduce the amount of pressure on the lever to avoid overflow. If you depress the lever a small amount, then water will trickle; this is perfectly normal and is not a fault.

Filling in the water tank of water dispenser

Open the cap of the water tank as illustrated in the figure. Fill in with pure and clean drinking water. Close the cap.

Caution!

Do not fill water tank with any liquid other than drinking water; beverages such as fruit juice, carbonated fizzy soda drinks, alcoholic drinks are not suitable for use with water dispenser. If such liquids are used, the water dispenser will malfunction and may be damaged beyond repair. The guarantee does not cover such uses. Some chemical ingredients and additives in such drinks / beverages may also attack and damage water tank material.

Only use clean pure drinking water.

Capacity of water dispenser tank is 3 litres [6.4 pints], do not overfill.

Push the water dispenser lever with

a rigid cup. If you are using a plastic disposable cup, then push the lever with your fingers from behind the cup.

18

EN

Page 19
Image 19
Blomberg DND 1976 X, DND 1972 XD, DND 1972 ED manual Water dispenser, Filling in the water tank of water dispenser