3Installation Instructions

A WARNING - Risk of fire

•The clothes dryer (“appliance‘) installation must be performed by a qualified installer.

•Install the appliance according to the manufacturer’s instructions and local codes.

•Do not install a clothes dryer with flexible plastic venting materials. If flexible metal

(foil type) duct is installed, it must be of a specific type identified by the appliance manufacturer as suitable for use with clothes dryers. Flexible venting materials are known to collapse, be easily crushed, and trap lint. These conditions will obstruct the clothes dryer’s airflow and increase the risk of fire.

ATo reduce the risk of severe injury or death, follow all installation instructions.

SAVETHESE INSTRUCTIONS

Electrical connection

Connect the appliance to a grounded outlet protected by a fuse or circuit breaker of suitable capacity.

Dryer shipped with cord to fit this type 4 -wire receptacle

4-wire receptacle

(14 -30R)

If yo u have 3-wir e receptacle, like this , a 3-wire dryer cord mu st be purc hased locall y.

3-wire receptacle

(10 -30R)

3-Wire Electrical Connection

If your receptacle is a 3-wire receptacle as shown below, you must obtain a 3-wire dryer cord. A dryer cord can usually be found at your local hardware supply, electrical supply or home center. Cord should have closed loop or upturned end wire terminating connectors.

3- wire receptacle

( 10-30R)

Typical 3- Wire Dryer Cord 240V/30 amp NEMA 10-30 Type SRDT

A If the dryer is installed in a mobile home, recreational vehicles, new branch-circuit installations or in areas where local codes do not permit grounding, only a 4-wire power supply cord shall be used.

To change the cord:

1.Make sure that the dryer is not plugged into any power outlet.

B DO NOT plug end of dryer power cord into a live receptacle before connecting dryer power cord to dryer terminals and closing junction/splitter box as described below.

B DO NOT repair old power supply cords. Power cord must be changed only by a qualified person. There is a risk of electric shock!

2.Remove the screw from the cover of the junction box located at the top rear of the dryer.

3.Remove the red, white and black wire from the terminal block.

4.Remove the green ground wire from the ground terminal.

5.Loosen the strain relief clamp holding the 4-wire cable.

6.Thread the 4-wire cable out through the strain relief clamp.

7.Thread the new 3-wire dryer cord through the strain relief clamp.

8 - EN

Page 7 Page 9
Page 8
Image 8
Blomberg DV16540NBL00 Installation Instructions, Electrical connection, Wire Electrical Connection, To change the cord
Page 7 Page 9

DV16540NBL00 specifications

The Blomberg DV16540NBL00 is a premium tumble dryer designed for efficiency, convenience, and exceptional performance. With its modern aesthetic and user-friendly features, this appliance is ideal for families and individuals seeking a reliable solution for their laundry needs.

One of the standout features of the Blomberg DV16540NBL00 is its generous 8 kg load capacity, making it suitable for handling large laundry loads. This capacity allows users to dry more clothes in a single cycle, saving time and energy. The dryer operates with a heat pump technology, which not only dries clothes efficiently but also minimizes energy consumption, earning it an impressive energy rating of A+. This technology uses a closed-loop system to recycle hot air, reducing overall energy usage and cost.

Equipped with a range of drying programs, the Blomberg DV16540NBL00 offers tailored solutions for various fabric types and clothing items. These include specific settings for cotton, synthetics, and delicate fabrics, ensuring optimal drying conditions for each load. The sensor drying technology is another highlight, as it detects moisture levels in the drum and adjusts drying times accordingly, preventing over-drying and protecting fabric quality.

Additionally, the DV16540NBL00 features a user-friendly digital display, making it easy to select programs and monitor cycle progress. The machine benefits from a delay timer, allowing users to set a convenient drying schedule, which is particularly helpful for those with busy lifestyles.

Maintenance is straightforward with the Blomberg DV16540NBL00, thanks to its built-in self-cleaning condenser. This feature ensures that the condenser remains clean and efficient, reducing the need for frequent manual cleaning and enhancing the longevity of the appliance.

In terms of design, the dryer showcases a sleek, modern look with a door that opens wide for easy access to the drum. The drum itself is designed with a soft-care feature to gently tumble clothes without causing damage, ensuring that items come out soft and fluffy.

Overall, the Blomberg DV16540NBL00 combines efficiency, advanced technology, and user-friendly features, making it an excellent choice for anyone looking to enhance their laundry experience while minimizing environmental impact. Whether you are dealing with everyday laundry or special fabrics, this tumble dryer stands out as a reliable and efficient household appliance.
Top Page Image Contents