Blomberg KFD 9950 X, KFD 9952 X manual Egg tray, Sliding Body Shelves, Chiller compartment

Models: KFD 9952 X KFD 9950 X

1 55
Download 55 pages 51.23 Kb
Page 20
Image 20
Egg tray

Egg tray

You can install the egg holder to the desired door or body shelf.

Never store the egg holder in the freezer compartment

Sliding Body Shelves

Sliding body shelves can be pulled by slightly lifting up from the front and moved back and forth. They come to a stop point when pulled towards front to allow you reach the foods placed at the back of the shelf; when it is pulled after slightly lifted upwards at the second stop point, the body shelf will be released.

The shelf should be hold tightly from the bottom as well in order to prevent it from tipping over. The body shelf is placed on the rails at the sides of the refrigerator body by bringing it to one lower or one upper level.

The body shelf should be pushed backwards to seat it completely.

Sliding Body Shelves1 2Chiller compartment

Manual background3

4

Chiller compartment

Chiller compartments enable the foods to be frozen become ready for freezing. You can also use these compartments to store your food at a temperature a few degrees below the fridge compartment.

You can increase the inner volume of your refrigerator by removing any of the chiller compartments. To do this, pull the compartment towards yourself; the compartment will lean against the stopper and stop. This compartment will be released when you lift it about 1 cm and pull it towards yourself.

19

EN

Page 20
Image 20
Blomberg KFD 9950 X, KFD 9952 X manual Egg tray, Sliding Body Shelves, Chiller compartment