Blomberg TKF 9431 A manual Changing the contrast, Auxiliary function, Drying degree, Anti-creasing

Auxiliary function

Audio Warning

	Cancel	Audio warning		Audio warning		Audio warning
audio warning			level 1		level 2		level 3

Your dryer will give an audio warning when the programme comes to an end. If you do not want to hear this buzzing or want to change the volume level, you need to press the “Volume level” button. No audio warning will be given when “x” appears on the screen.

CYou can select this function either before or after the programme starts.

started in the second figure.

Changing the contrast

Contrast can be adjusted in order to make the symbols on the display appear clearer. It may particularly be necessary to change the contrast setting of the display when the dryer is installed over a washing machine.press and Press and hold the Spin Speed/Time button for 3 seconds.

When the contrast is changed at the end of 3 seconds, all symbols on the display will become visible for 3 seconds in order to indicate that the process is complete. Perform the same procedure to revert back to the previous contrast setting.

Drying degree

Used to adjust the required dryness level. More drying is performed compared to the default settings when “+” sign appears and less drying is performed when “-” sign appears. Programme duration can change depending on the selection.

A This function must be selected before the programme starts.

Anti-creasing

A 2-hour anti creasing programme to prevent laundry from creasing will be activated if you do not take the laundry out after the programme is over. This programme rotates the laundry in 600-second intervals to prevent creasing. Press “Anti-creasing” button to activate. Anti-creasing is activated but the programme is running in the first exemplary figure. Drying is over and the first step of anti-creasing has

Warning indicators

CWarning indicators may differ according to

the model of your machine.

Filter cleaning

A warning symbol will appear to remind filter cleaning after the programme finishes.

CIf the filter cleaning symbol flashes continuously, please refer to “Suggested

solutions for problems”.

Water tank

A warning symbol will turn on at the end of the programme or when the tank is full with water. The machine stops operating if the warning symbol turns on when a programme is running. To restart the machine, please drain the water in the water tank. Press “Start/Pause/ Cancel” button to start the programme after you have emptied the water tank. The warning symbol turns off and the programme resumes

15 EN