REPLACING THE INTERIOR LIGHT BULB (See diagram)
Should the light fail to work switch off at the socket outlet and pull out the mains plug. Follow the below instructions to check if the light bulb has worked itself loose.
If the light still fails to work obtain a replacement E14 screw cap type
15 Watt (Max) bulb from your local electrical store and then fit it as follows:
1.Switch off at the socket outlet and pull out the mains plug. You may find it useful to remove shelves for easy access.
2.Remove the light diffuser cover as shown in figure
3.Replace the
4.Reassemble the light diffuser cover as shown in figure (d).
“Push firmly to ensure cover is fitted properly.”
5.Carefully dispose of the
“Replacement light bulb can easily be obtained from a good local electrical or DIY store.”
17
EN
