Bloomfield 2286EX, 2288EX, 2280, 2282 owner manual Servicing Operational Adjustments, Timer

SERVICING — OPERATIONAL ADJUSTMENTS

BREW	BREW	QUALITY	DRIPOUT		AFTER HOURS
TIMER	TEMP	TIMER	TIMER		TIMER
(IN SECONDS)	(IN °F)	(IN 5 MIN INCR) (IN SECONDS) (IN ONE HR INCR)
210	194	70		60	3	TEMP WATER
						PROBE LEVEL
	185	20				PROBE
100 320	OFF 205	OFF 120	30	90	OFF	6

UNDER

TOP COVER

A B C D E

A.Adjust Brew Time

B.Adjust Brew Temperature

C.Adjust Quality Timer

D.Adjust Dripout Timer

E.Adjust After Hours Timer

CAUTION:

Electric Shock Hazard

Unplug or disconnect the brewer from electric power before removing the top cover

IMPORTANT: Adjustments must be performed by a qualified technician ONLY.

1.Access the Controls: All adjustments on the E-Max™ LX may be accessed by removing the top cover or top warmer station from the brewer. The adjustments are directly behind the front panel.

2.Adjust Brew Time: The time the brew solenoid is open maybe adjusted by turning the shaft of the left-most control (A). Turning the shaft clockwise increases the time. Ten degrees of rotation is approximately equal to seven seconds change. Adjust until a complete brew is achieved without overflowing the airpot or server.

3.Adjust Brew Temperature: Ideal brewing temperature is 195ºF to 205ºF. Realistically, the maximum brew temperature is the local boiling temperature minus 10ºF. To adjust the temperature, turn the shaft of the second control (B). Turning the shaft clockwise increases temperature. Fifteen degrees of rotation is approximately equal to 1-1/4ºF.

4.Quality Timer: (not used on airpot and thermal brewers).

5.Adjust Dripout Timer: This feature disables the brew switch for an amount of time to allow all water to finish dripping through the grounds. The length of time may be adjusted by turning the shaft of the fourth control (D). Turning the shaft clockwise increases the time. Ten degrees of rotation is approximately equal to 2-1/2 seconds.

6.Adjust After Hours Timer: This feature places the brewer into an energy-saver mode if no brew has been initiated for a length of time. Time may be adjusted by turning the shaft of the fifth control (E). Turning the shaft clockwise increases the time. Turning the shaft fully counter- clockwise turns the After Hours function off. Adjustment is in one hours increments.

9