Bloomfield WVG-136RW CLEANING INSTRUCTIONS continued, Ventilator Weekly Cleaning, Hot Surface

CLEANING INSTRUCTIONS (continued)

CAUTION:

ELECTRIC

SHOCK HAZARD

Disconnect appliance from electric power before cleaning.

CAUTION:

HOT SURFACE

Exposed surfaces

can be hot to the touch

and may cause burns. Allow appliance to cool before cleaning.

IMPORTANT:

Never allow PRE-FILTER or FILTER PACK to get wet. DO NOT wash either of these two filters. Washing these filters will ruin them and cause the appliance to shut-down.

IMPORTANT:

DO NOT spill or pour water into controls, control panel, wiring or coil-type hotplate elements. Damage to internal components will occur. Damage to internal components from water damage is not covered by warranty.

IMPORTANT:

DO NOT use steel wool or metal implements to clean cabinet surfaces.

VENTILATOR WEEKLY CLEANING

PREPARATION: Disconnect appliance from electric power Allow to cool before cleaning

FREQUENCY: Weekly

TOOLS: Warm water and a mild detergent Soft clean cloth or sponge Bristle brush

Container for disposal of grease

1.Remove the grease baffle, pre-filter assembly, grease trough and grease cup. Empty the grease trough and grease cup.

2.Remove the pre-filter from the filter frame. Wash and rinse the filter frame ONLY.

3.Wash and rinse the grease baffle, grease trough and grease cup in a sink or dishwasher using mild detergent and warm water. Allow to air dry.

4.Reinsert the pre-filter into the filter frame. Reinstall the pre-filter, grease baffle, grease trough and grease cup.

Procedure is complete

502 p/n 304986 OpM WVG-136 Ventless Griddle

18