Figure 13

GOLD

Outdoor LP Gas Barbecue Grill Model No. GBC1076WE-C

Operating Instructions (continued)

Operating Rotisserie

WARNING: When using electrical appliances, basic safety precautions should always be used, including the following:

1. Always attach Rotisserie to grill first, then plug cord into a grounded

outlet. To disconnect, turn Rotisserie “OFF” then remove plug from outlet.

2. Most grill surfaces and accessories are hot during and after cooking. Use

caution around grill, wear flame retardant BBQ mitt.

3. Do not use accessory attachments on Rotisserie not suppied by the

manufacturer. This may cause injuries. Do not use this appliance for other

than intended use.

4. Never cover bottom of your grill bowl with aluminum foil, sand or any

grease absorbent substance.

5. Should a grease fire occur, turn burners to (OFF) position, turn LP gas

tank valve “CLOSED”, leave lid CLOSED until fire is out.

6. To protect against electrical shock, do NOT immerse electrical cord, plug

or motor in water or expose to rain. Protect electrical elements from

burners, hot grill surfaces and grease.

7. Do NOT operate rotisserie with a damaged cord or plug, or if the rotisserie

malfunctions or has been damaged in any manner.

8. Do NOT let children operate grill or rotisserie, and do NOT let children play

nearby.

9. Unplug rotisserie motor from electrical outlet when not in use and before

cleaning. Allow to cool before adding or removing parts.

10. When rotisserie cooking, place a drip pan of some sort under the food to

be cooked. This will capture the drippings and keep grill clean of excess

grease which could cause a fire. Use caution when moving a drip pan

containing hot oils.

7. Insert rotisserie rod into rotisserie motor and place

Figure 17

other end of rotisserie rod into groves on bottom

 

bowl. (Figure 17 and 18)

 

8. Turn rotisserie motor “ON” to test food placement.

 

Note: Heavy side of meat or poultry should

 

rotate down towards the bottom bowl. Adjust

 

counterweight if needed for a proper balance. If

 

meat or poultry still does not rotate properly, remove

 

food and remount food for a proper balance.

 

9. Light grill per “Infrared Back Burner” lighting

 

instructions.

 

10. After grill is lit and temperature is set, keep lid

 

closed.

Figure 18

 

Rotisserie Cooking Tips

1.Meats (except for poultry and ground meats) should be brought to room temperature prior to cooking.

2.Use cooking string to tie around the uneven shaped meat or poultry.

3.If saving the dripping for gravy, place a dispolable aluminum drip pan directly under the food and on top of the heat plates.

4.Food preperation steps are the same for rotisserie cooking as they are for regular grilling.

5.If meat or polutry is too large or do not rotate properly on the rotisserie, the meat should be removed from the rotisserie and indirectly cook.

Operating Digital Timer

11. The motor is set for 120VAC, 50/60 Hz current.

12. This rotisserie is for use outdoors only and with this grill only.

CAUTION: If burner flame goes out during operation, immediately turn the gas (OFF) and open lid to let the gas clear for about 5 minutes before re-lighting.

WARNING: Keep rotisserie motor electric cord away from the heated surface of the grill.

WARNING: The rotisserie motor must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electric Code, ANSI/NFPA 70-1990.

WARNING: Do NOT operate the rotisserie with a damaged cord or plug, or if the Rotisserie malfunctions or has been damaged in any manner. Call our Customer Care at 1.800.762.1142 for replacement.

WARNING: The power supply cord has a 3-prong grounded plug. For your personal safety do not remove the grounding prong. It must be plugged into a mating 3-prong grounding type receptacle, grounded in accordance with the National Electrical Codes and local codes and ordinances.

WARNING: If an extension cord is used it must be properly grounded and suitable for use with outdoor

appliances. Keep the extension cord connection dry, off of the ground and out of the reach of children.

WARNING: When rotisserie motor is not in use remove and store in a dry indoor area.

WARNING: OUTDOOR USE ONLY. DO NOT EXPOSE TO RAIN.

Count-Up

1.Press “START/STOP” button. Timer will begin counting up from 0:00.

2.Press “START/STOP” button. Timer will stop.

Count-Down

1.Press “MIN” button to set desired number of minutes.

2.Press “SEC” button to set desired number of seconds.

3.Press “START/STOP” button. Timer will begin counting down from the pre-set time.

4.When timer reaches “0:00” a loud beep will sound for up to 1 minute.

5.To stop count-down at any time or stop alarm from sounding, press “START/STOP” button.

Light

Press “LIGHT” button. LCD will illuminate for 10 seconds.

Resetting the timer

If you have stopped timer during count-up or count- down mode, you can reset timer back to 0:00 by pressing and holding the two buttons indicated by the “RESET” lines.

Auto Shut-off

Figure 19

Digital Timer

MS

RESET

START/STOP MIN SEC LIGHT

Figure 20

Remove Digital Timer Back

Replace Digital Timer Back

CAUTION: Risk of Electric Shock. Keep extension cord connection dry and off the ground

 

WARNING: Use only on properly

Figure 14

 

grounded outlet.

 

Attaching Meat or Poultry

 

1. Attach rotisserie motor per “Assembly Instructions

 

 

 

– Rotisserie” instructions.

Figure 15

2.

Insert and secure rotisserie counterweight and

 

 

rotisserie handle onto rotisserie rod. (Figure 13)

 

3.

Insert one rotisserie fork onto rotisserie rod.

 

 

(Figure 14)

 

4.

Push rotisserie rod through the middle of the food

 

 

 

and insert the food evenly into the prongs of the

 

 

rotisserie fork. (Figure 15)

Figure 16

5.

Center food on rotisserie rod. Tighten rotisserie fork.

 

6.

Insert remaining rotisserie fork onto rotisserie rod

 

 

and insert rotisserie fork prongs into food. Tighten

 

 

rotisserie fork. (Figure 16)

 

1.To increase battery life, digital timer will automatically shut off when not in use after 3 minutes.

2.To turn it back on press “START/STOP” button

Replacing the batteries (See Figure 20)

1.Remove digital timer back cover, as shown.

2.Replace AAA batteries (2).

3.Replace digital timer back cover.