Contact 1.800.762.1142 for assistance. Do not return to place of purchase.

page no.

3

 

 

 

Assembly Instructions

DO NOT RETURN PRODUCT TO STORE.

For assistance call 1.800.762.1142 toll free. Please have your owner’s manual and serial number available for reference.

For Easiest Assembly:

•To avoid losing any small components or hardware, assemble your product on a hard level surface that does not have cracks or openings.

•Clear an area large enough to layout all components and hardware.

•When applicable, tighten all hardware connections by hand first. Once the step is completed, go back and fully tighten all hardware.

•Follow all steps in order to properly assemble your product.

Step Assemble left cart frame

1Attach left front and rear legs to frame support using 4 sets of large screws (B), lock washers (F), and washers (E).

Step Assemble right cart frame

2A. Attach right front and rear legs to LP tank support using 4 sets of large screws (B), lock washers (F), and washers (E).

B.Insert axle into LP tank support.

C.Insert rubber spacer (G) and wheels onto axle. Secure using 2 nuts (C).

D.Place hub caps onto wheels.

Step Assemble cart

3A. Attach back frame support to left and right legs using 3 sets of large screws (B), lock washers (F), and washers (E).

B.Attach front bottom panel to left and right legs using 2 sets of large screws (B), lock washers (F), and washers (E).

Note: image is shown from front.

Step Assemble cart 2

4A. Attach front top panel and LP tank heat resistant plate to left and right legs using 3 sets of large screws (B), lock washers (F), and washers (E).

B.Secure front bottom panel to front top panel using 2 sets of large screw (B), lock washer (F), washer (E), and wing nuts (D).

Note: image is shown from back.

Step Attach frame braces and LP tank support wire 5 A. Insert frame braces into slots on left and right cart frames.

B. Attach LP tank support wire to right cart frame using 2 wing nuts (D).