BISTRO
–Guide the thermos jug (8) into the pour over coffee machine with the dosage lid (9) and lid cap (10) in place. Ensure that the thermos jug (8) is positioned precisely beneath the filter holder (6).
Note: The safety switch (14) detects the thermos jug (8) when it is in place in the appliance. If the thermos jug is not positioned correctly in the pour over coffee machine then the pour over coffee machine will not switch on.
–Press the ON/OFF switch (15). The ON/OFF switch illuminates green through- out the brewing process.
–After a few seconds the water starts to flow through the coffee shower (11) into the filter holder (6) and subsequently into the thermos jug (8). This pro- cess requires approx. 6 minutes for a jug of coffee (1.2l/40oz).
–The pour over coffee machine switches off automatically as soon as the water tank (2) has been emptied of water.
Note: The pour over coffee machine will also switch off automatically as soon as the thermos jug (8) is removed from the appliance during the brewing process.
–In order to resume the brewing process simply press the ON/OFF switch (15) again once the thermos jug (8) has been put back in the correct position in the pour over coffee machine.
CLEANING THE Pour over coffee machine
–When cleaning the pour over coffee machine never use any chemicals, steel wool or abrasive cleaners.
–Only clean the housing (1) with a damp cloth.
–Never immerse the housing in water. Remember that this is an electrical
appliance.
Note: Always disconnect the pour over coffee machine from the mains prior to cleaning the appliance.
–Whenever possible clean the pour over coffee machine after every use. The following parts are dishwasher safe (only in the top compartment of the dishwasher):
2Water tank
3Water tank handle
4Lid for water tank
6Filter holder
7Coffee filter
9Dosage lid
10Lid cap
11Coffee shower
12Large stopper
13Small stopper
16 Measuring spoon
6
