7
FILLING THE WATER RESERVOIR
FILLING THE WATER RESERVOIR
1.Remove the water reservoir and open the lid.
2.Fill the water reservoir with water. Tip: The water reservoir should always be filled with fresh tap water or use your favourite mineral water.
3.Replace the water reservoir firmly into the unit and close the lid.
Alternatively you can simply open the lid of the water reservoir and fill with cold water without removing it from the machine.
PLACING A MINERAL WATER BOTTLE
1.Remove the water reservoir from the machine and put it elsewhere.
THE WARMING PLATE
2.Place the cover on the bottle holder.
3.Place the adapter on the water bottle.
4.Turn around the bottle and place it firmly into the unit. Note: When using a water bottle small amounts of water may drop out of the bottle adapter. This allows air flow so that the water pumps smoothly.
1.
2.Close the top cover while
