If the kettle is too full, boiling water may splash out.
–Always make sure you pour boiling water slowly and carefully without tipping the spout of the kettle too quickly.
–Avoid contact with steam emitted from the hole in the cap when the water is boiling or just after it has been switched off to avoid scalding.
Be careful when removing the cap to refill the kettle when the kettle is still hot.
–Do not forcefully hold the switch in the ON position or tamper with the switch to hold it in the ON position as this may cause steam to be ejected which could damage the automatic
WARNING
–When the water boils, steam comes out of the opening in the cap, as shown in the picture. Users should take particular care when using the kettle as steam
is very hot and can easily burn you.
– Please make sure the power cord does not touch the metal surface of the kettle as it gets very hot during the boiling process.
Ensure that the kettle is switched off before removing it from the base.
–Do not use the kettle for any purpose other than for boiling water.
–Extreme caution must be taken when moving the appliance when it contains hot water.
Do not place the base of the kettle onto a metal tray or any other metal surface when it is plugged into a power source.
–Do not use the appliance if there is any damage to the body, base, power cord or plug. If the appliance is damaged, it must be repaired by the manufacturer or an authorised agent in order to avoid danger.
SAVE THESE INSTRUCTIONS!
INSTRUCTION FOR USE
3
