2.19 Add/Remove Program (T320 only)

To activate the Edit Texte feature: Enter into the Settings menu, see section 2.1.

1.Select the EDIT TEXT option, and press the JustGoTM/ENTER key to accept.

To modify the welcome message, you will need to enter the letters and characters one by one. A total of 200 alpha- numeric characters can be saved.

2.Use the INCREASE or DECREASE keys to select any letter from A to Z or number from 0 to 9 as the first character. If you wish to leave a space between characters, select SPACE (blank character) between the 9 and the A characters. Press the ELEVATION DECREASE key to move to the next character. Now the second character must be selected. Repeat this procedure until you have entered the new welcome message. If you wish to modify a character before all 200 spaces are accepted, press the ELEVATION INCREASE key to backspace.

3.Once all letters and characters of your message are entered, press SAVE on the informational window to save your message.

From now on, your new welcome message will be displayed on the introduction screen.

2.19 Add/Remove Program (T320 only)

The T320 treadmill offers you the possibility to manage your main menu with your favorite programs by deleting from the menu on the screen the programs that you would rather not have on screen. After deleting it, you can, if you changed your mind, put it back to your menu with the add option.

To select the add/remove program feature: Enter the Settings menu, see Section 2.1.

1.Select the ADD/REMOVE PROGRAM feature with the INCREASE or DECREASE keys and press the JustGoTM/ENTER key to accept.

2.Using the INCREASE or DECREASE keys, select YES in front of the program name you want to add or keep and select NO in front of the programs you want to remove. Press the JustGoTM/ENTER key to accept.

NOTE – You cannot remove the program that appears on the console and the JustGo Program.

3T280PT280PT280C – T320

ExercisExercise Programs

Five Program Levels

One Walk Program

One JustGoTM Program

• One Hill Climb Program

One Manual Program

• One Speed Run Program

One Cardiovascular Program

One Track Program

• Interval Program for T280C and T320

• Runner’s Interval Program (T280C and T320)

One Random Program

• Four Memory Programs for T280P and T280C / Six for T320

• One Weight Loss Program

• Four Learn Programs for T280P and T280C / Six for T320

• One Heart Rate Control Program

• Heart Rate Access Feature

A program is a pre-set hill pattern. You will get the same profile (hills and valleys) every time you select the same specific exercise program. By increasing the levels you can change the predetermined hill profiles. The programs allow you to monitor your progress and they add fun and interest to your exercise.

Each segment time is equal to the selected exercise time divided by 15 segments. Therefore, a 45 minute exercise results in a 3 minute segment time.

W A R N I N G

BEFORE SELECTING ANY EXERCISE PROGRAM, FIRST STRADDLE YOUR FEET

ON THE FOOT RESTS. NEVER START ANY EXERCISE PROGRAM

WITH ONE OR BOTH FEET ON THE RUNNING BELT.

16

Page 16
Image 16
Bodyguard LT280P 3 T280PT280P--T280C - T320 ExercisExercise Programs, 2.19 Add/Remove Program T320 only, W A R N I N G