Tascam HD-P2 owner manual Specifications

Specifications

Recording Media: Compact Flash, Microdrive

File Format: BWF Broadcast Wave File (FAT16/FAT32)

Recording time: 24 minutes (256 MB Compact Flash, Fs=44.1 kHz 16 bit stereo)

Operating time: 5 Hours

Sample Rates: 44.1/48/88.2/96/176.4/192 kHz

Sample Clock refs: S/PDIF, Video (NTSC or PAL), LTC, WORD

Quantization: 16/24 bit

Pre-record buffer: Up to 10 seconds

Time code types: 23.976,24,25,29,29.97 DF/NDF, 30 DF/NDF

Frequency response

Nominal level: 20 Hz to 20 kHz	±1.0 dB (44.1 kHz/48 kHz)
MIC to LINE OUT: 20 to 40 kHz	0.5 dB/–4.0 dB (88.2 kHz/96 kHz)

20 to 80 kHz 0.5 dB/–20 dB (176.4 kHz/192 kHz) Noise level Trim Max (22 Hz to 22 kHz): Up to –55 dBu

MIC to LINE OUT THD+N

MAX LEVEL at 1 kHz: Up to 0.01% MIC to Line Out

TRIM MIN: Up to 0.01% 22 kLPF

Crosstalk at 1 kHz: Over 80 dB MIC to Monitor Out

Delay: 44.1 kHz	1.5 msec
192 kHz	0.7 mesc
Limiter: Attach time		Up to 25 usec
Release time		Up to 50 msec

Low Cut: High pass 100 Hz cut off –18 dB/OCT

Phantom Power: +48 Volt, 10 mA

Input/Output Connectors

Analog I/O

MIC Input

Connector: XLR–3–31 type

Input Impedance: 1.3 k¸ Balance

Mic Input Level: –60 dBu (Trim Max) to 13.8 dBu (Trim Min)

Internal Mic level: –60 dBu (Trim Max) to 13.8 dBu (Trim Min)

Headroom: 16dB/22 dB (with limiter)

Maximum Gain: 46.2 dB

Pad: 20 dBS

LINE Input

Connector: RCA Pin type Input Impedance:10 k¸

Input Level: –46.2 dBV (Trim Max) to 0 dBu (Trim Min)

Headroom: 16 dB

Maximum Gain: 46.2 dB

LINE Output

Connector: RCA Pin type

Input Impedance: 100  ¸

Input Level: –10 dBV

Head Room: +6 dBV

Headphone Output

Connector: 6 TRS PHONE jack (Tip: L, Ring: R, Sleeve: GND)

Output Power: 55 mW+55 mW (32 ¸)

Speaker Output:

500 mW (16 ¸)

Specifications

Digital I/O

COAXIAL INPUT/OUTPUT

Connector: RCA Pin type

Input Impedance: 75 ¸

Format: IEC60958 (S/PDIF)

Quantization: 24 bit

Other Inputs

LTC INPUT

Connector: XLR–3–31

Input Impedance: 75 ¸

VIDEO INPUT

Connector: BNC

Input Impedance: 75 ¸

KEYBOARD

Connector: PS/2

FIREWIRE

Connector: IEEE.1394 (6 Pin)

Format: IEEE.1394 (Asynchoronous)

Baud Rate: 400 Mbps

Display

LCD: 240x160 dots with backlight

Power

AC ADAPTOR

Input: USA/Canada 120 V AC, 60 Hz

Europe/U.K. 230 V AC, 50 Hz

Australia 240 V AC, 50 Hz

Output: DC12 V

Rash Current: 600 mA

Power Consumption: 6 W (CompactFlash)

Battery

8 x AA type dry cell (NiMH recommended)

Operating temperature: 0° to 35° C

Dimensions (w x d x h): 245 x 188 x 60

Weight: 1.2 kg (without the batteries)

Compatible Operating Systems:

Windows XP and Macintosh OSX ~10.3

TASCAM HD-P2 Owner's Manual 27