Bodyline Products International AX-5330 instruction manual Screw Cut Rear Panel Side Inner case

body, this will typically produce a poor shave and unusual sound. Do not remove the outer foil from the outer foil unit.

6.Before cleaning the trimming blade, slide the power switch off. Check that the trimming blade is not moving when cleaning it. Notes: After cleaning the shaver, apply shaver oil (sold separately) to

A	Flex-FoilTMhood B	shaver back
inner	screw
cut-	rear
	panel
side		inner case
panel	screw	Ni-Mh battery

the outer foil surface once every 3 uses. When the shaver has not used for a long time, be sure to clean the outer foil, inner blade and trimming blade, and apply shaver oil to the outer foil surface.

FOR RECYCLING THE Ni-Mh BATTERY

Never disassemble the shaver to remove the Ni-Mh battery except to dispose of the shaver.

The Ni-Mh battery in your shaver is recyclable. When you dispose of the shaver, please take care to remove the Ni-Mh battery and recycle it.

How to remove the Ni-Mh battery

>Turn on the power switch, and run the battery down until the in- ner blade stops moving. If the shaver is disassembled before the recharged electricity is depleted, it may cause a shock, catch fire and cause burns.

AXIS AIR 28 ENGLISH AXIS AIR 29 ENGLISH