>Follow the procedure below to disassemble the shaver with a screwdriver.

1.Remove the outer foil frame, outer foil frame and inner blade.

2.Loosen and remove the 4 screws on the top and bottom of the body with a Phillips screwdriver. (See the illustration “A”.)

3.Remove the side and rear panels. (See the illustration “A”.)

4.Loosen and remove the 6 screws with a Phillips screwdriver, and remove the rear case. (See the illustration “B”.)

5.Cut the lead wires, and take out the Ni-Mh battery from the inner case, while taking care not to short-circuit the (+) and (–) terminals. (See the illustration “B”.)

SPECIFICATIONS

> Power supply: Rechargeable battery/AC power supply

>Blade motion:

>Inner blade: Reciprocating

>Trimming blade: Reciprocating

>Rated voltage: AC 100 V – 240V

>Rated frequency: 50/60 Hz

>Rated current: 200 mA

>Rated time: 5 minutes

>Standard recharging time: 1 hour

>Battery: Ni-Mh cell (enclosed type), 2 pcs.

>Battery voltage: 1.2 V x 2

>Weight: 202 g

AXIS AIR 30 ENGLISH

AXIS AIR 31 ENGLISH

Page 16
Image 16
Bodyline Products International AX-5330 Specifications, Remove the side and rear panels. See the illustration a