Bogen & X600 manual Specifications, X450, X300

				Specifications
		X600		X450	X300
Power Output*		600W /Ch @ 70V		450W / Ch @ 70V	300W / Ch @ 70V
Input Sensitivity (selectable)				1V/0.1V
S/N Ratio (20 kHz BW)				104 dB ref. 70V, F.P.
Class of Operation				H
Connector:	Power	20A line cord		15A line cord	15A line cord
	Input			Pluggable 3-pin terminal strips
	Output
				5-pin "touch-proof" Barrier Strip
Power Bandwidth				20 Hz - 40 kHz .5% THD
THD @ 1 kHz Rated Power				less than .02%
Rated Load Impedance (per Ch.)		8 ohms		11 ohms	16 ohms
Frequency Response @ 1 watt				20 Hz- 20 kHz ± 0.25 dB
Output Regulation				1.5 dB @ 70V
Inputs		100k-ohm electronically balanced, 3-pin pluggable terminals strip
Low-Cut Filter		60 Hz, 2nd order roll-off, switch defeatable per channel
AC Input Voltage Range				95-130V AC, 60 Hz
AC Current Rating (full power)*		20A		15A	12A
AC Voltage				120V AC, 60 Hz
Indicators			Status, Limit, Signal,AC Power Status (Rear)
Temperature Range				15° to 105° F
Cooling			Dual Forced Air Variable Speed Fan
Physical Dimensions (W x H x D)				17" W x 3-1/2" H x 18-1/4" D
Product Weight		46 lb.		44 lb.	41 lb.
Protection		RF, DC, Low-frequency,Thermal, Low-impedance, Circuit Breaker, Short Circuit
Special Features		Sequential Turn-On Circuitry (defeatable), Sleep Mode (defeatable),
		Back-Slope™ AC Voltage regulation,Toroidal Power Transformer, Input Sens, CH B Input Select
* Both channels driven at nominal line		voltage 120V AC, 60 Hz.

11