Bogen & X600 manual Panel Descriptions, Black Max Front Panel

Panel Descriptions

Black Max Front Panel

1. Status Indicators - The Status LEDs are multi-purpose indicators, one for each channel.

Green - Amplifier is on and operating normally.

Amber - Amplifier is in low-power consumption Sleep Mode.

Red - Amplifier has protected itself due to a fault condition.

2.Signal Indicators - These illuminate green when signal is present at the output, one for each channel.

3.Limit Indicators - These indicators illuminate amber when excessive signal levels or very low impedance output loads cause output distortion to exceed a few percent. Under such conditions, a built-in Clip/Limiting circuit activates and reduces input signal levels to protect both amplifier and speaker loads. One for each channel.

4.Power Switch/Circuit Breaker - Magnetic circuit breaker controls AC power to the amplifier.

5.Fan Air Intake and Grilles - Air intakes for 2 independent, variable speed cooling fans. Each responds as needed to keep the amplifier cool while reducing dust build-up. Removable fan grilles are provided to allow access to the dust filters for cleaning.

2