Features
Rear Panel (GS-35, GS-60, GS-100 & GS-150)
1 | 5 | 7 | 22 | 14 | 16 | 18 | 19 | 20 |
12
3 | 4 | 10 | 9 | 11 | 6 | 8 | 21 | 2 | 17 | 13 | 15 |
1.Amplifier Output - Terminal strip containing all the Gold Seal output taps.
2.VOX - Variable control for adjusting TEL input signal level trigger point for automatic muting of Aux input (works only in the TEL input mode).
3.REMOTE MSTR - Screw terminal pair for connection of remote master volume control (Bogen model: GSRVC).
4.MIC/AUX/TEL PRECEDENCE - Screw terminal connections that allow externally controlled muting of indi- vidual inputs.
5.
6.TAPE OUT - RCA unbalanced output, pre EQ and master volume. (Mics are post
7.TO PWR AMP - RCA connection provides a high impedance, unbalanced signal level output as a feed to high impedance inputs of other external amplifiers.
8.AX - Variable control for adjusting the amount of Aphex Aural Exciter effect.
9.PRE OUT - RCA unbalanced output from preamp/mixer stage for connection to external signal processing equipment (used in conjunction with POWER IN and LINK switch).
10.POWER IN - RCA unbalanced direct input to power amp stage for connection to external signal processing equipment (used in conjunction with PRE OUT and LINK switch).
11.LINK - Switch that makes or breaks the internal connection between preamp/mixer stage and power amp stage for use with external signal processing equipment.
12.AUX 2 - RCA unbalanced input for dedicated Aux 2 input.
13.MIC 1 to 4 - Balanced XLR connectors for dedicated microphone inputs.
14.LO CUT FILTER - Enables or disables low frequency roll off (65 Hz) for all microphone inputs.
15.PHANTOM (MIC 1 to 4) - Individual switches enables or disables phantom power to each of the 4 dedicated microphone inputs (MIC 5 and MIC 6 phantom power selection — see page 6).
4
