Bolens Series 3000 installation instructions Hydo Return Tube

Outlet Ports

REAR

FRONT

Outlet Ports

Fourth Valve	Center Lift	Front Hitch	Angling
for 3 PT Hitch	Valve (auxiliary)	Valve	Valve

FIGURE 6

H)Install the valve assembly into the frame and loosely fasten with the previous removed hardware. Follow the installation instructions in the Owner’s Manual that came with the Front Hitch System Attachment and Hydraulic Angling Attachment for installing the hydraulic lines/tubes and securing the valve assembly to the frame. See Figure 7 and 8.

I)If not already installed, install previously removed O-Rings on the ends of the new hydraulic tube (F) (Aux. from Steering). Reassemble in reverse order using instructions in steps B and A. NOTE: When installing the steering pump port plate, place a small amount of grease on the O-Rings and cover the connector surface completely for reinstallation.

Center

Lift Lines

Front Hitch Angling

Hydo

Return Tube

FIGURE 7 FIGURE 8

7