Bosch Appliances Commissioning the MIC 500 Series Camera, Telemetry Connections, HD4 or HD5

6 en MIC 500 Series Camera Quick Start Guide MIC Series 500 Camera

A standard female BNC connector provides the composite video output from the MIC 500 Series camera.

Telemetry Connections

The MIC 500 Series camera can be daisy-chained in a multi-drop configuration, the last or furthest camera in the chain should be typically terminated with a 120 Ω resistor placed across the cameras receiving pair.

			Telemetry
		Signal Function	Telemetry Signal Name	HD4 or HD5
		RS485+ to camera	RxB	Pin 1
		RS485– to camera	RxA	Pin 2
		0v from control room	GND	Pin 3
		RS485– to control room	TxA	Pin 4
		RS485+ to control room	TxB	Pin 5
1.3	Commissioning the MIC 500 Series Camera

The MIC 500 Series camera provides twin protocol support with a single software pack. Switching between the installed protocols is easily done using cam-set or the on screen menu function. Three protocol packs are available: Forward vision (FV)/ Bosch, FV/Pelco and FV/ VCL.

All MIC 500 Series cameras are supplied set to address 1 and initially loaded with the FV / Bosch protocol pack. The available protocol packs are provided on the CD and can be loaded onto the camera using cam-set.

To use the MIC Series Universal Camera Setup software (cam-set), connect the MIC 500 Series camera power supply (HD4 or HD5) to a PC using either the MIC-USB485CVTR, an RS485 to USB signal converter, or for older PCs with a serial port, a suitable RS232 to RS485 converter can be used. Please refer to the Help and Instruction file in cam-set for further details.

F.01U.173.601 2.0 2010.11 User’s Manual Bosch Security Systems, Inc.