en
Additional options
* depending on model
Additional options can be set with the buttons X.
ŸoSped)sh/Pfct(VariWxEExpress Wash/ Speed Perfect/ (VarioSpeed) *
This function can reduce the running time by approx. 20% to 50% depending on the selected rinse programme. The change in the running time is indicated on the digital display H. To obtain optimum cleaning results at a reduced running time, water and energy consumption are increased.
§floadHHalf load *
If you have only a few items to wash (e.g. glasses, cups, plates), you can switch to “half load”. This will save water, energy and time. It is recommended to put a little less detergent in the detergent dispenser than for a full load.
·Hygiene *enigyH
The temperature is increased during the cleaning process. This increases the hygiene status. This additional option is ideal for cleaning e.g. chopping boards and baby bottles.
ÏIntensive zone *vezeisonIt
Perfect for a mixed load. You can wash very soiled pots and pans in the lower basket together with normally soiled utensils in the upper basket. The spray pressure in the lower basket is intensified, the rinsing temperature is increased slightly.
¿Extra drying *ngxtadryiE
An increased temperature during the final rinse and an extended drying phase ensure that even plastic parts dry better. There is a slight increase in the energy consumption.
Washing the dishes
Programme data
The programme data (consumption values) can be found in the summary of instructions. They refer to normal conditions and the water hardness set value •:‹…. Different influencing factors such as e.g. water temperature or line pressure may result in deviations.
auqAAquarosnesensor *
* depending on model
The Aqua sensor is an optical measuring device (light barrier) which measures the turbidity of the rinsing water.
The Aqua sensor is used according to the programme. If the Aqua sensor is active, “clean” rinsing water can be transferred to the next rinse bath and water consumption can be reduced by
Switching on the appliance
–Turn on the tap fully.
–Switch on ON/OFF switch (.
–Rotate programme selector 8 to the required programme.
The expected programme duration flashes on the digital display H.
–Press START button @.
The programme starts running.
Remaining running time display
When the programme is selected, the remaining running time of the programme is indicated on the digital display H.
The running time is determined during the programme by the water temperature, the number of utensils as well as the degree of soiling and may vary (depending on the selected programme).
16