Bosch Appliances ATM/POS Bridge Connections, English, ATM/POS bridge Installation Manual

ATM/POS bridge Installation Manual EN 5

1.5 Connections

Using the supplied cables, connect the bridge as follows:

1.Connect the supplied DC power adapter unit to the DC power input connector of the bridge.

2.Connect the RJ45 connector of the bridge via a straight Ethernet CAT5 network cable to a network switch or hub that supports 10BaseT. Alternatively, the bridge can be connected directly to the digital video recorder via a cross-over cable.

3.To configure the bridge, use an RS232 cable to connect the COM3 (console) port to the serial port of a PC. If you use the RS232 console cable supplied with the bridge, ensure that the bridge is powered before connecting the cable.

	COM 3 (console) RS232 connector
Ethernet RJ45 connector	DC Power input connector

Activity indicator

English

COM 4 RS485 connector COM 2 RS232 connector COM 1 RS232 connector

Bosch Security Systems