Program has already started; when a program hasReselect program; see Page 26. Before starting the started, the end time can no longer be selectedprogram,. select and start the desired end time; see
Page 19.

Fault

Possible cause

Action

 

 

 

 

 

 

Control lights do notA fuse has triggered.

Switch on/replace the

fuse.

shines.

 

Call Customer Service

if this fault is repeated.

 

 

 

Power failure.

An interrupted program will be resumed when power

 

 

returns. If the laundry

is to be removed during

 

 

a power failure, proceed as described under

 

 

•Emergency lock release"; see Page 29.

Appliance is in energy6saving mode. This is not a fault.

Press theSelect button; energy6saving mode is terminated.

Program

does not Start/Pause button not pressed.

Press theStart/Pause button.

start. Start/Pause

 

indicator

light

 

flashes.

 

 

Program does not start.

•Door open?" indicated in the display field.

•Press start" is indicated in the display field.

Loading door not

closed properly.

Check whether laundry is trapped in door.

 

 

Close

the loading door (a click should be heard).

 

 

Program continues.

End time selected

but still not activated

by pressingPress

theStart/Pause button.

the Start/Pause" button.

 

 

Program does not

End time selected and activated.

None. Appliance starts automatically.

start. •Time

delay"

is

 

indicated in

the

 

 

display field.

 

 

 

Clock cannot be setProgram. has already started; when a program hasWait until program ends. started, the clock cannot be set.

•Set clock:"

text

The setting has switched from hours

to minutes;None.

remains

in

the

both selection points have the same

text.

display

field

even

 

 

though

theMenu

 

 

button

has

been

 

 

pressed.

•--:--" is

Clock not set.

displayed instead

of

the end time in the

display field.

 

End time cannot beClock not set. selected.

Set clock; see Page 24.

Set clock; see Page 24.

36

Page 36
Image 36
Bosch Appliances Axxis+ WFR 2450, Axxis+ WFR 2460 manual Fuse