D1255/D1255B Installation Instructions 2.0 Digital Keypad
2.0 Digital Keypad
The D1255/D1255B Keypad features a digital keypad for accessing the menus, entering user passcodes and executing system commands in the control panel. As you press keys, the D1255/D1255B emits a muted beep tone (refer to Section 2.3 Audible Tones) to indicate that the entry is accepted. The keypad lights when you press keys, and remains lit for 20 sec.
When entering a passcode, press keys within 15 sec of each other. If 15 sec elapse between keystrokes, the entire entry clears, and you must start over. The keypad also "times out" on other functions if you wait 15 sec or more between key presses.
2.1Keypad Function Keys
The D1255/D1255B has five function keys. These keys control your system.
Table 1: Function Keys
|
|
Key | Description |
|
|
COMMAND | Use the [COMMAND] bar in combination |
| with one or two numeric keys to perform a |
| function. |
ENT/YES | Use the [ENT/YES] key to complete the |
| entry of your passcode at the keypad. |
| The [ENT/YES] key also selects the menu |
| item shown during a menu selection. |
|
|
PREV | When viewing a list, pressing the [PREV] |
| key returns you to the previously shown |
| item. |
NEXT | Press the [NEXT] key to pass over the |
| present item in a menu or list. |
MENU/ESC | Use the [ESC/MENU] key to returns to |
| the idle display. |
2.2Display
The D1255/D1255B Keypad displays the latest status conditions of the security system using words, numbers, and symbols in its display. When a series of events occur that affects the system, the D1255/D1255B displays each event in order of its priority.
For a complete listing and description of the D1255/D1255B
For the D9412G, D7412G, D7212G, D9124, D9412, D9112, D7412, and D7212 Control Panels consult Security System User’s Guide (P/N:
2.3Audible Tones
The D1255/D1255B Keypad has a
Table 2: | Audible Tones | |
|
|
|
|
|
|
Tone |
| Description |
Burglary |
| When an area is in alarm, the D1255/D1255B |
Signal |
| emits a steady, |
Entrance |
| The D1255/D1255B emits an intermittent beep |
Warning |
| tone during entry delay periods to remind the |
|
| user to disarm the area. This is a programmable |
|
| option. |
Exit |
| The D1255/D1255B emits an intermittent beep |
Warning |
| tone during exit delay and counts down the |
|
| number of seconds left until arming takes place. |
|
| This is a programmable option. |
Fire Signal |
| When an area is in fire alarm, the |
|
| D1255/D1255B emits a pulsed, |
|
| “bell” tone. |
|
|
|
Invalid Key |
| Pressing an invalid key, or sequence of keys, |
Buzz |
| causes the D1255/D1255B to emit a flat buzz |
|
| tone. |
Keypad |
| The D1255/D1255B emits a muted beep tone |
Encoding |
| as each key is pressed to indicate that the entry |
Tone |
| is accepted. To disable this feature refer to |
|
| Section 3.3.1 Setting the DIP Switches on |
|
| page 5. |
Trouble |
| When a trouble event occurs, such as a service |
Buzzer |
| alert, the D1255/D1255B emits a two tone |
|
| warble until you enter COMMAND 4. |
Watch |
| When you activate the Watch feature, an |
Tone |
| intermittent beep tone (the same as the |
|
| Entrance Warning Signal) alerts the user |
|
| anytime a watch point is faulted. This option is |
|
| programmable by point. |
Bosch Security Systems 8/04 | 3 |