![](/images/new-backgrounds/1090829/9082919x1.webp)
Installation
The gas supply line and electrical outlet must be located in the shaded space as shown in Figure 4: Gas Supply Line and Electrical Outlet Placement.
7 1/2" | 3 1/2" |
(190.5 mm) | 88.9 mm |
4 1/2" | 4" |
114.3 mm | (101.6 mm) |
13 1/8 " | 3 7/8" |
(333 mm) | (98 mm) |
| 30" |
(762 mm) | |
| 4 1/2" |
| 114.3 mm |
Figure 4: Gas Supply Line and Electrical Outlet Placement
If not already present, install gas shut off valve in an easily accessible location.
Make sure all users know where and how to shut off the gas supply to the range.
Note:
The installer should inform the consumer of the location of the gas shutoff valve.
| Important note for LP users |
| The range is shipped from the factory for use with natural gas. For use with |
| propane (LP) gas, your range must first be converted using the LP conversion kit. |
Cabinet Requirements | This unit is designed for installation near adjacent walls and projecting surfaces |
| constructed of combustible materials. Prepare the countertop and cabinets as |
| shown in Figure 5: Cutout Requirements - Typical Installation. |
| Allow a minimum of 30 inches between cabinets where range is to be installed. |
|
|
23 1/16"
(585.4 mm)
Figure 5: Cutout Requirements - Typical Installation
English 8