Installation
Adjust Front of Range for Proper Installation
1.Adjust front leveling legs so that the cooktop trim rests snugly against the countertop all the way around.
2.Verify that both front legs are resting solidly on the floor.
3.Use a level to verify that the range is level and plumb.
4.Carefully tip range forward to ensure that
The gas connection is complete. Proceed to “Test for Gas Leaks” on page 21.
Rigid Pipe Method | If using a flexible connector, return to “Flexible Connector Method” on page 17. |
Attach Rigid Pipe
D E D
B |
|
C | B |
B
A
Gas Flow to Range
F
Figure 22: Rigid Pipe Method
Table 5: Rigid Pipe Method
Letter | Item |
|
|
A | Elbow; Connect to regulator here |
|
|
B | Pipe Nipple |
|
|
C | Union |
|
|
D | Elbow |
|
|
E | Gas Shut Off Valve |
|
|
F | 1/2” to 3/4” Gas Pipe |
|
|
The configuration of the rigid pipe connection will vary depending on the location of the gas pipe stub. See Figure 22: Rigid Pipe Method for examples.
English 19