Bosch Appliances Dual-Fuel Slide-In Range installation instructions Terminal Block

Models: Dual-Fuel Slide-In Range

1 80
Download 80 pages 53.03 Kb
Page 17
Image 17

Installation

Three Wire Range Cord Connection The Four Wire Connection (above) is preferred, but where local codes and ordinances permit grounding through neutral and where conversion to four wire is impractical, the unit may be connected to the power supply via a three wire connection.

1.Disconnect electrical power at breaker box.

2.Remove the terminal block cover to expose the terminal block.

Figure 16: Terminal Block

3. Remove top nut, star washer, and round washer from each post.

Note:

DO NOT remove last round washer, last nut or internal wiring leads.

4.Attach white wire, round washer, star washer and nut IN THIS ORDER on top of ground strap on center post.

5.Attach red wire, round washer, star washer and nut IN THIS ORDER to left post.

6.Attach black wire, round washer, star washer and nut IN THIS ORDER to right post.

black

ground strap

white

red

Figure 17: Three Wire Connection

English 15

Page 17
Image 17
Bosch Appliances Dual-Fuel Slide-In Range installation instructions Terminal Block