DVR4C Installation Manual Menu system
EN 20
>> MISCELLANEOUS
The DVR firmware version is shown here. Select Factory defaults to set all parameters, except IP address, subnet mask, default gateway and disk setup, to their default values.
>>> SAVE SETTINGS
•Select Save Settings to save the current settings to a USB memory stick.
>>> LOAD SETTINGS
•Select Load Settings to load previously saved settings from a USB memory stick into the DVR.
>>> UPDATE FIRMWARE
•For authorized personnel only!
Select Update Firmware to load new firmware from a USB memory stick into the DVR. The new firmware overwrites the current firmware.
4.7Profiles >
The recording schedule is divided by weekday day, weekday night, weekend day and weekend night. Users can configure start and end time of each schedule.
>> PROFILES
>>> CURRENT PROFILE
•Shows the profile (Weekday - Day, Weekday - Night, Weekend - Day, Weekend - Night) that is currently active.
>>> WEEK START AND WEEK END
•Any day from Monday to Sunday can be used as a start date or end date of a week.
>>> DAY START AND DAY END
•Any time from 00:00 to 23:59 can be used as a start time or end time of a day.
•If the begin time is later than the end time, then the profile is active from the end time until the begin time on the next day.
>>EXCEPTION DAYS
Exception days can be set, apart from the four standard periods, e.g. Christmas. Start time and date, and duration of the Exception days can be configured.
•Up to 30 exception days can be set that override the calendar list.
•Use the up/down keys to move to an exception entry and press the select key to start editing.
Bosch Security Systems Version 1.1