DVR4C Installation Manual Menu system
EN 21
4.8 Disk Manager >
The Disk Manager menu gives access to information on the internal hard disk(s). The status of the recorded video and associated data is also accessed via this menu.
>> HISTORY
•All system events are listed on a History log which cannot be deleted or changed.
•Select a time frame to search by entering the start and end time.
•To search for a specifc type of event, select a filter option: All, Input Alarm, Motion, Text, Error or Status.
•Select Start to start the search.
•The history log includes remote login/logout, record start/stop, time/date change, hard disk format, Videoloss, Fan fail, Disk full, Disk fail, Power On/Off.
>> RECORDING SETUP
>>> RECORDING MODE
•When set to Continuous (default), the DVR overwrites older images when the hard disk is full.
•When set to Linear, the DVR stops recording when the hard disk is full and the administrator has to delete video manually.
>>> DISK FULL ALARM WARNING
•A warning message is generated when the used disk space exceeds the disk full warning percentage set.
•Select from 1 to 100% (default 95%).
>>BLOCK PLAYBACK
•Block playback of video that is older than a certain time.
•Select from "No block" (default), "24 hours", "2 days", "3 days", "4 days", "5 days", "6 days", "7 days", "14 days", "21 days", "28 days" or "31 days".
>> DELETE
•Data can be deleted from a designated time frame. This can be set from the beginning of the recorded data (fixed) to a user defined time.
•Select the date and time up to which the recorded data is to be deleted and then select Delete.
>> STORAGE SETUP
•The storage setup menu provides a way to enable or disable internal hard disks and to view the status of connected hard disks.
•Disk shows the internal disk that has been detected.
•Size indicates the disk size of each disk in GB.
•Set Enabled to either Yes and No to enable or disable a disk. If a disk is disabled, a message warns you that disabling a disk causes data loss. A new hard disk can be formatted if Enabled is set to Yes.
•Status indicates the status of the disk. OK indicates that the disk is operating correctly and can be used for recording; Fail indicates a problem.
>> STATUS OVERVIEW
•The status overview menu provides information on the status of the connected hard disks.
•Earliest/Latest Recording indicates the times of the earliest and latest recordings on the disk.
•Disk capacity indicates the total hard disk size in GB.
•Used space indicates the hard disk space that has been used by recordings.
Bosch Security Systems Version 1.1
