Relay Unit | Installation en 13 |
|
|
3Installation
3.1Unpacking
The Relay Unit is carefully packed for transportation.
The components contained in the box are protected, but should be handled with care.
Store the packaging material for further use (storage or transport).
1.Take all components out of the box and place the Relay Unit on the working space.
2.Check each component in the box, in accordance with the list of contents below.
3.Check that the Relay Unit and its accessories have not been damaged during transportation.
In case of defective or missing equipment, do not try to install the Relay Unit.
Contact immediately your local representative.
3.1.1 | List of contents |
Description
Relay Unit
Power supply adaptor (US) 115VAC/10VAC
Antenna 434MHz 1/2 L=13.4 in (34 cm) FME
Straight adapter
Right angled bended adapter
6.6ft (2 m) Cable FCC 6/4 Relay Unit User Manual
Bosch Security Systems | User Manual | F.01U.278.516 V1.0 2012.11 |