14 en InstallationRelay Unit
3.2 | Installation | |
3.2.1 | Generalities | |
| Install the Relay Unit in a dry place, away from any source of heat. | |
| Tools required: | |
| – | Torx T20 screwdriver. |
| – | Torx T10 screwdriver. |
3.2.2 | Installation on a piece of furniture | |
| It is recommended to place the Relay Unit on a | |
| anything (blanket or lace) on top of the unit. | |
3.2.3 | Wall installation | |
| You can fasten the Relay Unit on a smooth wall surface using two screws. The distance | |
| between holes is 6.2 in (157 mm). | |
| The power line cord should be placed inside the cable channels on the bottom of the Relay | |
| Unit. |
|
3.2.4 | Installing the antenna | |
| 1. | Use the straight adapter (4) for wall installation or the right angled bended adapter (3) |
|
| for installation on a piece of furniture. |
2
4 2
3
2.Fasten the adapter (3) or (4) on the antenna connector (1).
1
3.Fasten the antenna (2) on the adapter.
F.01U.278.516 V1.0 2012.11 | User Manual | Bosch Security Systems |