4.Locate the connectors and alignment notch on the
Memory module features
A – Connectors | B – Alignment Notch |
5.Locate the memory module expansion port and proceed as follows:
!Hold the module at a 45 degree angle and align the module contacts with the socket in the system. Push the connector into the socket.
!Press down on the edge of the module opposite the contacts until the lock tabs on the sides snap into place, securing the module.
Installing a memory module
If you are replacing a memory module and need to remove one that is already installed, do so as follows:
!Press the locking tabs away from the sides of the module and hold while gently lifting on the edge of the module.
