!PC Card Slot — Accommodates one type II PC Card. These cards are often storage or communication devices such as Static Random Access Memory (SRAM), Read Only Memory (ROM), Flash Memory, LAN, and Small Computer System Interface (SCSI).

!USB Port — The Universal Serial Bus (USB) port allows you to connect up to 127 USB-equipped peripheral devices (printers, monitors, scanners, etc.) to your NEC Versa.

!Kensington Lock Slot — Provides a connection for an optional Kensington Lock.

Power Button

The Power button is a “smart” switch, meaning that it recognizes when the system is in Standby mode. If in Standby mode, you cannot power off until you slide the Power button to the right to resume operation. (The BIOS parameter “System Switch” must be set to “Sleep.”)

Put the unit in Standby mode when you need to be away from your system for a short period of time and want to return to where you left off. Standby mode shuts down all devices in the system while retaining data and system status. Go to Start, Shut Down, Standby to put your system into Standby mode.

Use the Power button in the following ways:

Slide the Power button forward to power on.

Slide the Power button forward to resume from Standby mode and proceed with normal operation.

Hold the Power button in place for four or more seconds to power off the system (power override). Only use this option if you cannot power off your system using Start, Shut Down.

Introducing Your NEC Versa 1-11

Page 19
Image 19
NEC Versa Series manual Power Button