NEC Versa Series manual Disconnecting the CD-ROM Drive, CD Care, Using the System Drives and Bays

Models: Versa Series

1 150
Download 150 pages 55.12 Kb
Page 72
Image 72
Disconnecting the CD-ROM Drive

7.Run the setup, installation program or other instructions provided with the software application to start or load the CD contents.

Note Before recording from the external CD-ROM drive to the internal hard disk drive, disable the internal microphone. To disable the internal microphone, go to Start, Programs, Accessories, Entertainment, Volume Control. Choose Options, Properties and remove the check from the Microphone box in the 'Show the following controls' window.

Disconnecting the CD-ROM Drive

Follow these steps to disconnect the external CD-ROM drive:

1.Double click the Unplug/Eject icon on the toolbar and a box will pop up.

2.Highlight the floppy drive and press Stop.

3.Pull the USB connector out of the port.

CD Care

When handling CDs, keep the following guidelines in mind.

!Always pick up the disc by its edges.

!Avoid scratching or soiling either side of the disc.

!Do not write on or apply labels to the data side of the disc.

!Keep the disc away from direct sunlight or high temperatures.

!Clean fingerprints or dust from the disc by wiping it with a soft cloth. Gently brush the cloth from the center of the disc toward the edge.

CD Care5-8 Using the System Drives and BaysManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background Avoid using benzene, paint thinner, record cleaner, static repellent, or any other chemical on the disc. Chemicals and cleaners can damage the disc.

5-8 Using the System Drives and Bays

Page 72
Image 72
NEC Versa Series manual Disconnecting the CD-ROM Drive, CD Care, Using the System Drives and Bays