Repair of Bleed Valve

Tools or Supplies Required

♦	Vise	♦	5/8 Open end wrench	♦	3/4 Open end wrench

♦	9/16 Open end wrench	♦	Teflon Tape, optional*	♦	Loc-Tite, optional **

43				35
43
			24	36
		37	26
		37
40	39	38	47
		38

Bleed Valve Repair Kit Installation

1.Open bleed valve (ref # 34), turning handle counter-clockwise to release pressure from material side of pump.

2.Remove bleed valve return hose, (ref # 48) from bleed valve return fitting, (ref # 44).

3.Place wrench on bleed valve connector, (ref # 35). Turn counter-clockwise to remove valve from outgo tee, (ref # 33).

4.Secure valve vertically in vise, clamping vise jaws on the flats of valve nut ( ref # 36 ). See picture above.

5.Use wrench to remove valve housing (ref # 41) from nut, (ref # 36).

6.Remove ball, (ref # 37 ), seat, (ref # 26) and crush washer, (ref # 24).

7.Install new crush washer and seat, ( ensuring the beveled surface of seat is facing out ) into the bleed valve nut ( ref # 36 ). Place new ball into bevel of seat.

8.Re-install valve housing ( * Use of Teflon Tape or pipe sealant is optional ). Tighten 1/4 turn past finger tight. If leakage occurs at this junction point during operation, tighten 1/4 turn more or until leakage stops.

9.To install new valve stem, or valve stem seals, (ref # 38 or 39), continue at step 9 .

10.Complete steps 1 to 5 from above.

11.Place valve housing in vise.

12.Use 1/2” wrench to loosen jam nut ( ref # 42 ), and remove handle.

13.Remove jam nut from valve stem ( ref # 40 ), and unthread valve stem down through housing.

14.Remove existing o-ring and washer ( ref # 38 & 39 ) from stem. Replace with new parts, ensuring they are installed in the correct order on stem. Refer to diagram.

15.Thread stem back into housing until all threads are used. Thread jam nut on to valve stem.

16.Re-assembly valve. Refer to steps 6 to 8 from instructions above.

17.Thread handle onto valve stem. Allow stem to thread down onto ball ( internally ). Tighten handle firmly. Hold handle while tightening jam nut ( Ref # 42 ) tightly against handle. ( ** Use of Loc-Tite is optional )

H.E.R.O. INDUSTRIES

300S / 300SL LEGEND Owner’s Manual

300S Legend specifications

I.C.T.C. Holdings Corporation has earned a distinct reputation in the aviation industry with its flagship product, the 300S Legend. This advanced aircraft represents a significant leap forward in design and technology, combining performance, comfort, and cutting-edge features.

One of the most notable characteristics of the 300S Legend is its impressive aerodynamic efficiency. This aircraft incorporates a sleek fuselage design paired with advanced wing technologies, which contribute to enhanced stability and fuel efficiency. The wings are crafted from lightweight composite materials, enabling the 300S Legend to achieve superior lift during takeoff and landing.

The cockpit of the 300S Legend is a testament to modern aviation engineering. It is equipped with a state-of-the-art avionics suite that includes touchscreen displays, providing pilots with intuitive controls and easy access to flight data. The integration of advanced navigation systems ensures precise routing and enhanced safety, allowing pilots to operate the aircraft with confidence in various weather conditions.

In terms of performance, the 300S Legend is powered by cutting-edge engines that deliver exceptional thrust while minimizing fuel consumption. This not only extends the aircraft's range but also reduces operational costs, making it an attractive choice for commercial operators. The powerplant features advanced noise reduction technologies, ensuring compliance with stringent environmental regulations and providing a quieter cabin experience for passengers.

The interior of the 300S Legend is designed with passenger comfort in mind. The cabin boasts spacious seating arrangements, with customizable configurations to suit different missions, whether it be corporate travel or cargo transport. Large windows provide ample natural light, creating an inviting and comfortable atmosphere. The use of premium materials and finishes further enhances the overall experience, making travel not only efficient but also enjoyable.

Safety is paramount in the design of the 300S Legend, which is equipped with redundant systems and advanced safety features that meet and exceed regulatory requirements. Enhanced turbulence prediction systems and advanced autopilot functionalities contribute to a secure flying experience, ensuring that both passengers and crew are protected throughout the journey.

In conclusion, I.C.T.C. Holdings Corporation's 300S Legend combines innovative technologies with outstanding design to redefine the standards of modern aviation. Its commitment to performance, safety, and passenger comfort positions it as a leading choice for those seeking a versatile and reliable aircraft.

I.C.T.C. Holdings Corporation 300S Legend owner manual Repair of Bleed Valve

Models: 300S Legend