Bosch Appliances FLM325IM manual System Overview, Certifications and Approvals, Region

Fire Alarm Systems FLM‑325‑IM Contact Module

FLM‑325‑IM Contact Module

The FLM‑325‑IM Contact Module provides a variety of fire alarm functions, such as monitoring manual pull stations, waterflow devices, or other dry contact fire alarm activation applications. The module allows for alarm, trouble, and supervisory conditions. The module is mounted inside of a single‑gang back box and is normally out of view.

System Overview

The FLM‑325‑IM Contact Module allows compatible fire alarm control panels (FACP) to supervise Form A or B dry contact devices in a polling circuit. The module has an eight‑bit microprocessor and communicates with the control panel (both power and data) over a two-wire polling circuit. The initiating device circuit (NFPA Style B) connected to the module can have up to 20 normally-open (NO) dry contact devices. Each module can monitor one normally-closed (NC) device (NC devices must be non- alarm applications).

▶Digital data communications and power provided over a two-wire circuit

▶Advanced digital communications protocol compatible

▶Class B circuit for dry contact devices

▶Module address programming (1-254) with the D5070 Analog Device Programmer

Certifications and Approvals

Region	Certification
USA	UL	UOXX: Control Unit Accessories, System
		(ANSI/UL 864)

Installation/Configuration Notes

The following products are compatible with the FLM‑325‑IM Contact Module:

Category	Product ID	Product Description
Control Panels:	FPA‑1000	Analog addressable fire panels
	Series
Pull Stations	FMM‑325A	Analog addressable manual pull
		station (single action)
	FMM‑325A‑D	Analog addressable manual pull
		station (double action)
Programmers:	D5070	Analog device programmer

www.boschsecurity.com