Setting Up Your Range

Setting the Clock (after power to the range has been off)

Always set the clock after installation or after a power failure. Once power returns to the oven, the clock defaults to 12:00 am.

The time of day is displayed in hours and minutes.

The clock time will appear during all oven operations except when the timer or a timed cooking operation is running.

The oven is preset to a 12-hour clock and indicates AM and PM.

Note: To switch to a 24 hr. clock, see "Select Function” section.

1.CLOCK will be displayed and the hour digits will flash.

Turn knob to select hour and AM or PM. Turning to the right increases by 1 hour increments; turning to the left decreases by 1 hour increments.

2.Touch TIME. CLOCK will still be displayed and the minute digits will flash.

3.Turn knob. Set minutes.

4.Touch TIME and the clock is now set.

Changing the Clock Time

1.Touch Time. TIMER 1 will flash in display.

2.Turn knob to select CLOCK .

3.Touch TIME again and hour digits will flash.

4.Turn knob to change hours.

5.Touch TIME again and minute digits will flash.

6.Turn knob clockwise or counter-clockwise to change minutes.

7.Touch TIME again and the clock is set.

12: 00

A M

CLOCK

 

 

 

 

 

BEEP REMINDER

If operation is not completed,the oven will beep periodically as a reminder to set clock time. Push OFF.

0: 00 A M

H R:M I N

TIMER 1

TIMER

 

Helpful Hint

To cancel the TIME selection when setting the clock, touch OFF at any time while in the clock mode.

Page 5

Page 8
Image 8
Bosch Appliances HES252U, HES245U, HES247U manual Setting Up Your Range, Changing the Clock Time, Beep Reminder, Helpful Hint