Using the Timer/s
Setting the Timer/s
1.Touch TIME and TIMER 1 will be displayed.
0:00
TIMER 1
2.Turn counterclockwise and TIMER 2 will be displayed. Select TIMER 1 or 2, then push TIME. SET TIMER 1 (2) appears in display. Minutes flash.
Clearing the Timer/s
1.Touch TIME once.
2.Turn knob to select the appropriate timer. Touch TIME.
3.Turn knob once in clockwise direction and CLEAR TIMER will flash in display.
4.Push TIME.
0: 00
(CUT | CLEAR TIMER 1 | |
HERE) | ||
|
| 1: 00 |
H R:M I N | SET TIMER 2 |
TIMER |
3.Turn knob to the right to increase by 1 minute increments or left to decrease by 1 minute increments. Continue to rotate knob until desired minutes are displayed.
5.Touch Time pad. TIMER 1 (2) will flash in display.
6.Turn knob to clear TIMER 1 (2).
7.To clear TIMER 1 (2), push Time.
8.If TIME pad is not touched, oven will beep and display will continue flashing.
If setting only minutes, press START. Otherwise, continue to step 4.
4.Touch TIME again and the hours will flash.
2:02 P M
H R:M I N | SET TIMER 2 | |
TIMER | ||
|
5.Turn knob to the right to increase by 1 hour increments or left to decrease by 1 hour increments until desired hours are displayed.
6.Touch TIME again. The TIMER is now set.
7.If TIME or START is not touched, oven will begin beeping and timer display will begin flashing.
When the specified time has elapsed, the control beeps. TIMER 1
(2)END flashes in the display.
1.Touch TIME to return to main screen.
Changing the Timer/s
1.Touch Time. TIMER 1 will appear in display. Select either TIMER 1 or 2.
0: 00 A M
TIMER 1
2.Push TIME. RESET TIMER 1 (2) appears in the display. Minute digits flash.
3.Turn knob clockwise or
4.Touch TIME again and hour digits will flash.
5.Turn knob clockwise or
6.Touch TIME and new time is set.
CANCELLING
If operation is not completed, the oven will beep periodically as a reminder to set time. Push OFF to exit the TIMER mode.
Selecting OFF when not in a setting mode will stop oven function.
Page 18
