Bosch Appliances LBB 4172 user manual Assigning languages to desks, Language Assignment...’

DCN Next Generation Simultaneous Interpretation

en 10

insertion will still be highlighted in the language list box.

•Click on the arrow-shaped ‘Insert’ push button.

The selected language will be inserted in the free channel you have chosen.

To assign languages to further channels, repeat the above procedure.

Clearing all channels in the channel-language list This option allows you to clear assigned languages from every channel. To do so:

•Click on the ‘Clear All’ push button.

All channels will now be free. This will be indicated by the symbol ‘...’ appearing after all channel numbers. Once you have finished assigning languages to channels:

•Click on the ‘Ok’ push button. You will return to the main window.

i Note

Clicking on the ‘Cancel’ push button closes the dialogue box without initiating the commands and/or changes. This applies to all dialogue boxes in the Simultaneous Interpretation program.

3.2.2Searching for a language in the language list

This option allows the system to automatically search for all languages beginning with the letter that you specify. To carry out a search:

•Select the ‘Search’ text box, situated to the right of the ‘Search’ push button.

•Enter the first letters of the language you wish to search for.

•Click on the ‘Search’ push button.

Figure 9 ‘Language List’ box showing successfully completed search

The system searches for languages beginning with the letters you entered. The first corresponding language located will be highlighted. Once you have selected a language (manually or using ‘Search’) you can then insert it into a channel (see paragraph 3.2). If no language is found, a dialogue box with the following text is displayed:

‘No match found’

•Click on the ‘Ok’ push button. The dialogue box will disappear.

3.3 Assigning languages to desks

You can specify the languages that will be output from each interpreter desk. Each desk has two outputs, A and B. (For an explanation of A and B outputs, see paragraph 1.2.2). The language that will be output under normal conditions is always assigned to output A. For output B, you can specify none, some or all languages that are output.

To assign languages to desks:

•Select the ‘Edit’ menu and click on ‘Desk-

Language Assignment...’.

The following dialogue box appears:

Figure 10 The ‘Desk-Language Assignment’ dialogue box.

The dialogue box contains the following elements:

•Booth identification number field

•‘Auto Relay’ check box

•Booth/Desk navigation grid

•Two desk identification fields, each with:

•‘Output A’ drop-down list box

•Set of ‘Output B’ radio buttons

•‘Output B’ list box

•‘Ok’ and ‘Cancel’ push buttons.

The system is configured so that the ‘Desk-Language Assignment’ dialogue box displays adjacent pairs of desks for language assignment. The procedure for the left-hand desk is exactly the same as for the right-

Bosch Security Systems B.V. 2005 September 9922 141 70363