LTC 5136 Series Instruction Manual Controller Operation | EN 12 |
|
|
CAMERA key: This key is only used to correct an error when selecting a camera number. If another key is inadvertently pressed when a camera selection is being made, the Camera button may be pressed to put the Controller immediately back into camera selection mode. Normally, a camera selection is made by entering the desired camera number using the numeric keypad, then pressing ENTER.
SHOT key: This key is used to recall
Certain
ON key: This key is used to activate auxiliary functions of the AutoDome cameras and Allegiant Series receiver/drivers. Press ON, then enter the desired auxiliary number on the numeric keypad, and press ENTER to complete the action.
Certain auxiliary numbers are also used to program certain AutoDome features. Refer to the AutoDome operation manual for a complete listing of the available features.
OFF key: This key is used to deactivate auxiliary functions of the AutoDome cameras and Allegiant Series Receiver/Drivers. Press OFF, then enter the desired auxiliary number on the numeric keypad, and press ENTER to complete the action.
Certain auxiliary numbers are also used to program certain AutoDome features. Refer to the AutoDome operation manual for a complete listing of the available features.
NUMERIC keypad: These keys are used to enter numeric data. When the first numeric key is pressed, the LED display will become a data display and indicate the numeric value pressed.
ENTER key: This key is used to terminate commands. When using the ON or OFF function, holding this key will cause the function to repeat until the key is released. This feature is useful where auxiliary functions are associated with level type camera adjustments.
CLEAR key: This key is used to clear invalid entries. In some cases, it can be pressed twice. If there is numeric data in the camera display, the first push clears this data, and the second push returns the Controller to the camera mode. This allows the operator to clear incorrect data without leaving the current mode. If there is no data in the LED display, the first push clears the entire Controller, back to the default state.
FOCUS and IRIS keys: These rocker switches are used to control the lens focus and iris functions.
Joystick: Movement of the joystick left or right will pan the selected camera left or right. Movement of the joystick up or down will tilt the camera up or down. Rotation of the joystick knob will move the zoom lens in or out.
If the camera is capable of variable speed operations, the degree of joystick deflection (or rotation) will correspond to different speed responses.
Bosch Security Systems 08May 2013
