LTC 5136 Series Instruction Manual Unpacking | EN 6 |
|
|
1 UNPACKING
This electronic equipment should be unpacked and handled carefully.
Check for the following items:
•LTC 5136/61 or LTC 5136/51 Desktop Controller.
•Interface unit.
•Power supply.
•Power supply cable.
•One (1) 3 m (10 ft) cable with two (2)
If an item appears to have been damaged in shipment, replace it properly in its carton and notify the shipper. If any items are missing, notify your Bosch Security Systems, Inc. Sales Representative or Customer Service.
The shipping carton is the safest container in which the unit may be transported. Save it for possible future use.
2 SERVICE
If the unit ever needs repair service, the customer should contact the nearest Bosch Security Systems, Inc. Service Center for authorization to return and shipping instructions.
Service Centers
U.S.A.: Phone: | |
fax: | |
NationalServiceCenter@ca.slr.com | |
Canada: |
Europe, Middle East & Asia Pacific Region:
For additional information,
see www.boschsecuritysystems.com.
NOTE: Grounded wrist straps must be worn and proper ESD safety precautions observed when handling the
3 DESCRIPTION
The LTC 5136 Series Controllers are designed for use with the Bosch AutoDome Series cameras. They can also be used to operate any of the conventional Allegiant® Series of Receiver/Drivers.
The LTC 5136 Series controllers support control of all AutoDome and Allegiant receiver/driver functions including variable speed pan/tilt/zoom,
(8)camera sites can be controlled from each of the 16 biphase outputs.
The biphase control code cable can extend a maximum distance of 1.5 km (5000 ft), using
1.0mm2 (18 AWG) shielded twisted pair cable (Belden 8760 or equivalent).
3.1Power
The model number and operating voltage are shown on the product label.
|
| Voltage | Power at |
Model No. | Rated Voltage | Range | Rated Voltage |
LTC 5136/51 | 230 VAC, 50/60 Hz | 195.5 to 253 | 6 W |
LTC 5136/61 | 120 VAC, 50/60 Hz | 105 to 132 | 6 W |
Bosch Security Systems 08May 2013
