Bosch Appliances LTC 8571, LTC 8572, LTC 8570, LTC 8569 instruction manual 4POWER SPECIFICATIONS, En

LTC 8569 Series Instruction Manual Power Specifications EN 8

Two 2-meter (6 ft) data cables, for interface to Allegiant main CPU bays, are supplied with the 2-channel versions; four cables are supplied with the 4-channel versions. These units can provide data to any device capable of accepting biphase control code, including the following:

•Allegiant Satellite systems

•AutoDome Series cameras

•Conventional Allegiant Receiver/Driver Series

•Allegiant LTC 8770 Relay Follower Series

Control code wiring to the remote devices can be connected to the outputs of the code mergers using either star or daisy chain wiring configurations. Each output is capable of driving up to eight (8) remote devices using a daisy chain wiring configuration. Multiple units may be cascaded to obtain additional biphase code outputs.

The Code Merger units also provide an address offset functionality. This feature is convenient when it is necessary to convert camera address numbers, encoded within the biphase data, to a higher value. Offset increments of 16, 32, or 48 can be enabled via an internal dip switch selection.

4POWER SPECIFICATIONS

Model No.	Rated	Voltage	Power1
	Voltage	Range
LTC 8569/60	120 VAC, 50/60 Hz	108 to 132	12 W
LTC 8570/60	120 VAC, 50/60 Hz	108 to 132	12 W
LTC 8569/50	220-240 VAC,	198 to 264	12 W
	50/60 Hz
LTC 8570/50	220-240 VAC,	198 to 264	12 W
	50/60 Hz
LTC 8571/60	120 VAC, 50/60 Hz	108 to 132	12 W
LTC 8572/60	120 VAC, 50/60 Hz	108 to 132	12 W
LTC 8571/50	220-240 VAC,	198 to 264	12 W
	50/60 Hz
LTC 8572/50	220-240 VAC,	198 to 264	12 W
	50/60 Hz

1Nominal power at rated voltage.

Bosch Security Systems 15 March 2004