LTC 9213/01, LTC 9225/00 Instruction Manual Unpacking |
| EN 6 | |
|
|
|
|
1.0 UNPACKING | 3.0 | DESCRIPTION |
This equipment should be unpacked and handled with care. If an item appears to have been damaged in shipment, notify the shipper.
Verify that all parts shown in the Parts List have been included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representative.
The original packing carton is the safest container in which to transport the unit. Save it for possible future use.
1.1Parts List
Qty Item
1Unit (verify model number)
1This installation manual
1
1Mounting bracket
LTC 9213/01 Hardware kit
1Structural band strap, 3 m (10 ft)
4 Screw, hex head, M8 x 25
4 Washer, spiral lock, M8
4 Screw, oval head, #
1Structural band strap, 3 m (10 ft), that must be cut into two (2) 1.5 m (5 ft) lengths
2Band buckle
6Screw, hex head, M12 x 35
6Nut, hex, M12
6Washer, spiral lock, M2
6Washer, plain, M12
The LTC 9213/00 and LTC 9225/00 Pole Mount Adapters are designed to permit the installation of indoor/outdoor wall mounts to a pole capable of supporting the total weight of equipment installed. The pole can range from 76 mm (3 in.) to 381 mm (15 in.) in diameter.
4.0INSTALLATION
WARNING: This installation should be made by a qualified service person and conform to all local codes.
4.1Mount Compatibility
Pole Mount | Suggested | Maximum |
Adapter | Wall Mounts | Rated Load |
LTC 9213/01 | LTC 9212/00 | 9 kg (20 lb) |
| LTC 9215/00 | 9 kg (20 lb) |
| LTC 9215/00S | 9 kg (20 lb) |
LTC 9225/00 | LTC 9216/00 | 45 kg (100 lb) |
| LTC 9222/00 | 90 kg (200 lb) |
4.2Tools Required
4.2.1LTC 9213/01 Pole Mount Adapter
8 mm Hex wrench
Banding tool (TC9311PM3T is recommended)
4.2.2LTC 9225/00 Pole Mount Adapter
12 mm Hex wrench
Banding tool (TC9311PM3T is recommended)
4.3Mounting
1.Cut the structural band strap into two (2) 1.5 m (5 ft) straps.
2.0 SERVICE |
| 2. Attach the bracket to the pole at the band | |||||||||
If the unit needs servicing, contact the nearest Bosch |
| desired height using the two (2) straps and the | |||||||||
Security Systems Service Center for authorization to |
| two (2) buckles provided. | |||||||||
return and shipping instructions. |
| 3. Tension the straps according to the instructions | |||||||||
|
|
| |||||||||
Service Centers |
|
| for the banding tool used. Banding tool, | ||||||||
|
| TC9311PM3T, is recommended and may be | |||||||||
USA |
|
|
| ||||||||
|
|
| purchased separately. A | ||||||||
Phone: |
|
| instruction chart is provided with each pole | ||||||||
Fax: |
|
| mount. The ends of the bands are bent around | ||||||||
CCTV Spare Parts |
|
| the buckle (see Figure 1). | ||||||||
Phone: |
|
|
|
|
|
|
|
|
|
| |
Fax: |
|
|
|
|
|
|
|
|
|
| |
BoschCCTVparts@ca.slr.com |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| ||
Canada |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Phone: |
|
|
|
|
|
|
|
|
|
| |
Europe, Middle East & Asia Pacific Region |
|
|
|
|
|
|
|
|
| Tension and | |
|
|
|
|
|
|
|
|
| Bend Back Bands | ||
Phone: |
|
|
|
|
|
| Bend Buckle | ||||
For additional information, see |
|
|
|
|
|
| Tab Over Bands | ||||
|
|
|
|
|
|
|
|
|
|
www.boschsecurity.com. | Figure 1: Bending Method |
| |
|
|
Bosch Security Systems, Inc. December 23, 2008 |
|