Continuous Shredder (MUZ 4 DS2)
WARNING
1.Blades on discs are sharp. Handle carefully. Do not grip the discs by the blades.
2.When operating continuous shredder, keep hands clear of filling and discharge tubes. Only work with pusher.
3.The continuous shredder must be completely assembled before placing on the power unit.
4.Always operate the continuous shredder fully assembled and with cover in place.
The MUM 4635 UC and the MUM 4420 UC Bosch Compact Series Kitchen Machines include the MUZ 4 DS2 continuous shredder attachment. The continuous shredder attachment consists of, figure 9:
Figure 9.
a.Cover closure/pusher
b.Cover
c.3 slicer/shredder discs:
•reversible slicing disc
•reversible shredding disc
•grating disc
d.disc holder/slinger
e.Housing
Continuous shredder, intended use
The continuous shredder attachment has been designed for slicing, shredding and/ or grating of vegetables, as well slicing/ shredding of soft cheeses and sausages or meat and grating of vegetables and hard cheese.
Use of Slicer/Shredder
Before beginning to use this or any other attachment, make sure that the power unit is on a smooth, clean, suitable work surface and switched to Off position, “O/Off,” and that you have removed the motor drive cover.
1.Before using the continuous shredder for the first time, it is recommended that the cover closure/pusher, cover, discs, disc holder/slinger and housing be washed. All components of the continuous shredder are dishwasher safe. After washing, rinse well and dry before using.
WARNING
The blades on the discs are very sharp. Handle with care.
2.The continuous shredder is used in mode 2, see table 1. To place the continuous shredded on the power unit, the arm must be rotated to the horizontal position. Depress the release button, see 4a, and move the arm as necessary so that the arm is horizontal. If you have not already done so, remove the motor drive cover from the mid- speed drive, as shown in figure 10.
16
