Placing Slicer/Shredder into Operation
Make sure the power unit is on a smooth, clean, suitable work surface and switched to the Off position, “O/Off.” Pull the electrical cord or unwind the electrical cord to the necessary length and plug into a convenient outlet. The continuous shredder is now ready for use.
Figure 10.
Assemble the continuous shredder in the order as shown in figure 9:
1.Insert the disc holder/slinger into the housing.
2.Select disc to be used and, making sure that the side desired is facing upward, place it on disc holder.
3.Place cover on housing and turn counterclockwise until cover snaps into place and arrows are aligned, see figure 11.
4.The continuous shredder is now assembled.
5.Place bowl on the power unit. Depress the release button and raise arm so that the bowl can be placed in position, and then lower the arm to horizontal position.
6.Place continuous shredder on the
Figure 11.
Place items to be sliced, shredded or grated in feeding funnel and be sure to use the pusher to feed items into the discs when in operation.
Learning how to feed food properly into the feed funnel is the most important factor for proper slicing and grating:
17