Bosch Appliances MUM 6610 UC owner manual Troubleshooting, Problem, Possible Cause, Remedy

TROUBLESHOOTING

Problem	Possible Cause	Remedy
Power	1.A circuit breaker may have	Reset circuit breaker or
unit does	tripped or a fuse has blown	replace fuse.
not	in the power supply circuit.
function
	2.The built-in safety cutout	If the safety has tripped due to
	may have tripped.	overheating:
		> Turn the power unit to the Off
		position, “O/Off,” and unplug.
		> Remove the attachment that was
		in use when safety tripped, and
		correct whatever the situation
		is that caused the safety to trip.
		> Wait a few minutes (minimum 30
		minutes recommended) to allow
		the motor to cool.
		> Depress the manual reset button
		on the bottom of the power unit,
		see figure 2b.
		> Reinstall the attachment and
		resume use per attachment’s
		instructions.
Power	1.The motor has become	> Turn the power unit to the Off
unit hums	blocked; that is, the	position, “O/Off,” and unplug.
but	attachment being used has	> Remove the attachment
nothing is	become jammed.	that was in use and correct
moving		whatever the situation is that
		is causing the blockage.
		> Reinstall the attachment and
		resume use per attachments
		instructions.

25