Removing Contents
Before beginning to remove the contents from the food processor, make sure that the power unit has been turned to the Off position, “O/Off.” Remove the top cover from the bowl by depressing the interlock button on the handle, step 1, and turning the cover clockwise, step 2, while lifting, see figure 21a. With the cover removed the bowl can be removed from the power unit by turning it clockwise while lifting, see figure 21b. The contents of the bowl may now be poured into a suitable container or bowl, as desired. Be sure to hold the processor blade in the bowl by placing a finger on the top of the processor blade’s center column while pouring.
Next lift the processor blade out of the bowl by grasping the knob of the center column of the processor blade and lifting.
CAUTION
Processor blade is very sharp.
Handle with care.
Care and Cleaning
of Food Processor Blade and Bowl
All components of the food processor are dishwasher safe. Do not use scouring cleaners on any of the food processor parts.
The power unit of the kitchen machine should be cleaned with a clean, damp cloth only. Never use coarse or caustic cleaning products to clean this appliance. Never immerse the power unit in water.
How to Use Discs w/5-Cup Capacity Bowl
The food processor attachment provided with the MUM 7150 UC Bosch Concept Series Kitchen Machine also has a disc holder with 3 discs, in addition to the processor blade, see figure 18.
The disc holder, three discs and its
Use of disc holder and discs
Before beginning to attach this or any other attachment, make sure that the power unit is on a smooth, clean, suitable work surface and switched to the Off position, “O/Off,” and that you have removed the motor drive cover.
1.Before using the bowl with the disc holder and discs for the first time, it is recommended that the bowl, bowl cover, pusher/measuring cup, disc holder and discs be washed. All components of the food processor attachment are dishwasher safe. Or they may be washed in warm soapy water. After washing, rinse well and dry before using.
2.If you have not already done so, remove the motor drive cover from the power unit’s mono drive and place the bowl on the mono drive of the power unit and turn the bowl counter- clockwise with a slight downward pressure until the bowl is firmly seated on the drive coupling, see figure 19a.
3.Select disc to be used and place on disc holder and place over driveshaft, see figure 22a.
Figure 22.
23