a.
b. c. d.
e.
Figure 4.
4a. Bowl (either stainless steel or plastic) with
4b. Standard dough hook (all systems except MUM 7010 UC)
4c. Twin beating whisks
4d. Professional dough hook (MUM
7010 UC model only)
4e. Bowl scraper
How to Use Dough Hook
The dough hook and mixing bowl are intended to be used to knead yeast doughs and to mix cookie and pastry doughs and also when adding nuts, chocolate chips, dried fruit, hard butter or shortening, hardened brown sugar, etc. to batters.
Use of mixing bowl with dough hook
Before beginning to attach this or any other attachment, make sure that the power unit is on a smooth, clean, suitable work surface and switched to off position “O/Off,”
and that you have removed the motor drive cover.
1.Before using the mixing bowl and dough hook for the first time, it is recommended that the bowl,
The driveshaft can be removed for cleaning by pushing down on the shaft, as shown in figure 5a. After washing, rinse and dry the driveshaft and replace in the bowl by pressing it in, from the bottom, as shown in figure 5b, until it snaps into place.
a. | b. |
|
|
Figure 5.
2.If you have not already done so, remove the motor drive cover from the power unit’s mono drive and place the mixing bowl, whether the stainless bowl or the plastic bowl, on the mono drive of the power unit and turn the bowl counter- clockwise with a slight downward pressure until bowl is firmly seated on the mono drive coupling, see figure 6.
CAUTION
Failure to make sure that the bowl is properly seated on the mono drive coupling before the power unit is turned on can result in damage to the bowl and/or coupling.
10
