Bosch Appliances NDC-284-PT, NDC-274-PT, NDC-274-PM installation manual Camera positioning

18 en Installation MicroDome Camera 200 Series

3.7.1Camera positioning

The camera module position can be adjusted along two axes. When adjusting the camera position ensure that the picture display on the monitor is level.

CAUTION!

The image sensors are highly sensitive and require special care for proper performance and extended lifetime. Do not expose them to direct sunlight or bright spotlights in operating and non-operating conditions. Avoid bright lights in the field of view of the camera.

Set the camera to the desired position by performing the following steps:

1.For horizontal adjustment (pan) rotate the camera module in the base. Do not rotate more than 350°.

2.For vertical adjustment (tilt) rotate camera. Do not rotate more than 55°.

AR18-10-B012 v1.55 2012.09 Installation Manual Bosch Security Systems